Increasing Envelope Address Lines

If you routinely use very long addresses in the envelopes you create in Word, you may have noticed that Word limits the number of lines you can put in an address. This limit does not make itself manifest while you are using the Envelopes and Labels option from the Tools menu, where you can enter as many lines as you like. Instead, Word just may decide to not print all your address lines when you actually print or create the envelope. Different readers report an ability to print anywhere from six to eight lines, depending on font size.

The reason for this is quite simple. The Envelopes and Labels tool in Word depends on a predefined style when creating an envelope. The address style, appropriately enough, is named Envelope Address. When you click on either the Print or Add to Document buttons in the Envelopes and Labels dialog box, this style is grabbed and used for the address area itself.

The problem is that the style is defined to use a frame, which in and of itself is not a problem. The problem is that the frame is defined to be exactly a certain height. If the text won't fit in that frame, the bottom portion of your text is just cut off.

There is a simple fix to this problem: All you need to do is change the style. To do this, and get rid of this problem, follow these steps when using Word 97 or Word 2000:

1. Click on the New tool on the toolbar to open a new document based on the Normal.Dot style. (If you want to fix this problem in other templates, you should open the template directly or create a blank document based on that style.)
2. Choose the Style option from the Format menu. Word displays the Style dialog box.
3. In the List drop-down list at the bottom of the dialog box, make sure you select All Styles.
4. In the list of styles, select Envelope Address.
5. Click on Modify. Word displays the Modify Style dialog box.
6. Click on the Format button and choose Frame. This displays the Frame dialog box.
7. Using the Height drop-down list, select At Least.
8. Click on OK to close the Frame dialog box.
9. Make sure the Add to Template check box is selected, at the bottom of the Modify Style dialog box.
10. Click on OK.
11. Click on Cancel to close the Style dialog box.

If you are using Word 2002 or Word 2003, the process for changing the style is a bit different:

1. Click on the New tool on the toolbar to open a new document based on the Normal.Dot style. (If you want to fix this problem in other templates, you should open the template directly or create a blank document based on that style.)
2. Choose the Styles and Formatting option from the Format menu. Word displays the Styles and Formatting pane.
3. Using the Show drop-down list at the bottom of the Styles and Formatting pane, make sure you select All Styles.
4. In the list of styles, hover the mouse pointer over the Envelope Address style.
5. Click on the drop-down arrow that appears at the right side of the style name.
6. Click on Modify. Word displays the Modify Style dialog box. (Click here to see a related figure.)
7. Click on the Format button and choose Frame. This displays the Frame dialog box.
8. Using the Height drop-down list, select At Least.
9. Click on OK to close the Frame dialog box.
10. Make sure the Add to Template check box is selected, at the bottom of the Modify Style dialog box.
11. Click on OK.
12. Close the Styles and Formatting pane.

Finally, the steps are (again) different if you are using Word 2007:

1. Click on the Office button and choose New to display the New Document dialog box. Use this dialog box to create a new, blank document based on the Normal.Dot style. (If you want to fix this problem in other templates, you should open the template directly or create a blank document based on that style.)
2. With the Home tab of the ribbon displayed, click the small down-pointing arrow at the bottom-right of the Styles group. Word displays the Styles list.
3. Click the Options link at the bottom of the Styles list. Word displays the Style Pane Options dialog box. (Click here to see a related figure.)
4. Using the Select Styles to Show drop-down list, choose All Styles.
5. Click OK to dismiss the Style Pane Options dialog box. The Styles list now displays all the styles available at the current time.
6. In the list of styles, hover the mouse pointer over the Envelope Address style. (You'll have to scroll through the list to find it; it is about two-thirds of the way down the list.)
7. Click on the drop-down arrow that appears at the right side of the style name.
8. Click on Modify. Word displays the Modify Style dialog box.
9. Click on the Format button and choose Frame. This displays the Frame dialog box. (Click here to see a related figure.)
10. Using the Height drop-down list, select At Least.
11. Click on OK to close the Frame dialog box.
12. Make sure the New Documents Based on This Template radio button is selected, at the bottom of the Modify Style dialog box.
13. Click on OK.
14. Close the Styles list.

When you save your document or close Word, you are asked if you want to save your changes to the template. Make sure you do this. Now you will be able to have as many lines in your envelope as you desire, since the frame used by the Envelope Address style will grow to accommodate the length of any text you enter.

There is one caveat to this, of course: Envelopes are not physically infinite in size. This means that eventually your frame will overrun the bottom of the physical envelope. There is no real way to guard against this; you need to simply make sure that you manually limit the number of lines in your address.

For those who are familiar with frames, one way around this problem is to modify the other frame attributes used by the Envelope Address style. You can adjust the frame so it appears higher on the envelope, and simply change the "Exactly" height so the frame won't run off the page. You can also change other style attributes, such as the font size used. How you handle this is entirely up to you and the types of envelopes you create.